A Reconfigurable Dual-Opposition Architecture for Single-Hand Assembly and Manipulation

๐Ÿ“… 2026-09-19
๐Ÿ“ˆ Citations: 0
โœจ Influential: 0
๐Ÿ“„ PDF
๐Ÿค– AI Summary
ไธบ่งฃๅ†ณๅ•ๆ‰‹่ฃ…้…ๅ’Œๆ“ไฝœ้—ฎ้ข˜๏ผŒๆๅ‡บไบ†ไธ€็งๅฏ้‡ๆž„ๅŒๅฏน็ซ‹ๆžถๆž„๏ผŒ้€š่ฟ‡ๅ››ๆŒ‡็‹ฌ็ซ‹้ฉฑๅŠจๅŠๅฏ้‡ๆž„ๆ‰‹ๆŽŒๅฎž็Žฐไธค็‰ฉไฝ“ๅŒๆ—ถๆŠ“ๅ–ไธŽๅ่ฐƒๆ“ไฝœใ€‚
๐Ÿ“ Abstract
In-hand assembly is constrained by the need to maintain grasps on two separate parts while controlling their relative motion within a single hand. To enable both in-hand assembly and manipulation, we present a reconfigurable dual-opposition architecture. Specifically, to support simultaneous grasping of two parts and coordinated in-hand manipulation, four independently actuated fingers are organized into two virtual finger (VF) oppositions, with their relative configuration controlled by a reconfigurable palm. To describe hand motion and simultaneous two-object grasping configurations, a kinematic model of the fingers and palm and an object-size-conditioned workspace formulation are built. To further evaluate motion performance and assembly capability, finger-joint motion and palm tracking are characterized, and in-hand assembly is demonstrated through tasks involving grasping, alignment, fastening, and pressing. Ablation experiments further demonstrate the importance of finger abduction/adduction and palm reconfiguration for successful in-hand assembly. In simulation, the proposed hand achieves a mean continuous sphere rotation success rate of 98.6% over diameters of 40-230 mm, compared with 73.8% for the LEAP Hand. After policy fine-tuning with external disturbances, the proposed hand achieves 92.8% success under disturbances from multiple directions, compared with 45.2% for the LEAP Hand. Hardware demonstrations further show in-hand rotation of objects of different sizes using policies trained in simulation. Together, these results show that the proposed architecture supports both assembly of two separately held parts and coordinated manipulation of a single object within one hand.
Problem

Research questions and friction points this paper is trying to address.

in-hand assembly
single hand
two separate parts
relative motion
grasping
Innovation

Methods, ideas, or system contributions that make the work stand out.

reconfigurable dual-opposition architecture
in-hand assembly and manipulation
virtual finger oppositions
palm reconfiguration
finger abduction/adduction
๐Ÿ”Ž Similar Papers
No similar papers found.
๐Ÿ’ผ Related Jobs
No related jobs found.
W
William Su
Aerospace Engineering Program, University of California, Berkeley, Berkeley, CA 94720, USA.
Y
Yunosuke Nakamura
Department of Mechanical Engineering, University of California, Berkeley, Berkeley, CA 94720, USA.
Yixiao Wang
Yixiao Wang
University of California, Berkeley
roboticsdiffusion modelstrajectory prediction
Y
Yitong Li
Department of Mechanical Engineering, National University of Singapore, Singapore 117575.
M
Mingrui Yu
Department of Mechanical Engineering, University of California, Berkeley, Berkeley, CA 94720, USA.
Huanan Qi
Huanan Qi
Department of Mechanical Engineering, National University of Singapore, Singapore 117575.
Boyuan Liang
Boyuan Liang
University of California, Berkeley
RoboticsControlMechatronics
Masayoshi Tomizuka
Masayoshi Tomizuka
Mechaniccal Engineering, University of California
mechanical engineeringdynamic systemscontrolmechatronics
Jianshu Zhou
Jianshu Zhou
University of California, Berkeley
RoboticsDexterous ManipulationRobotic HandsEmbodied IntelligenceHumanโ€“Robot Interface